互感器現場高壓介損測量方法的實現
郝坤峰1，孫睿貞1， 許冰2，楊子龍2
(1 駐馬店供電公司，河南 駐馬店 463000；
2 河南省電力公司檢修公司，河南 鄭州 450000)
摘 要：串聯諧振補償法用于互感器高壓介損測量是解決現場諸多問題的有效方法。利用電抗與容抗的不同性質，串聯諧振補償法可以大大減小試驗電源的容量，給出了測試實例，驗證了該方法的可行性。在現場使用串聯諧振補償法進行測量要根據被測設備情況合理選擇儀器設備和電抗器臺數，使其滿足試驗回路的要求。
關鍵詞：互感器；互感器高壓介損；串聯諧振補償法
中圖分類號：TM452；TM835.4 文獻標識碼：A 文章編號：1007-3175(2014)03-0034-03
Implementation of Onsite High-Voltage Mutual Inductor Dielectric Loss Measurement Method
HAO Kun-feng1, SUN Rui-zhen1, XU Bing2, YANG Zi-long2
（1 Zhumadian Power Supply Company, Zhumadian 463000, China;
2 Henan Electric Power Company Maintenance Company, Zhengzhou 450000, China）
Abstract: The connection in series resonance opposition method used to measure high-voltage mutual inductor dielectric loss is an available approach to solve many onsite problems. The different properties between reactance and capacitive reactance were used,so that the connection in series resonance opposition method could reduce the capacity of testing power supply. Experiments verified the feasibility of this method. According to the situation of measured equipment, the onsite connection in series resonance opposition method needed reasonable selection of apparatus and the number of reactors to meet the requirements of testing circuits.
Key words: mutual inductor; high-voltage mutual inductor dielectric loss; connection in series resonance opposition method
參考文獻
[1] 張一塵.高電壓技術[M].2版.北京：中國電力出版社，2000.
[2] 李建明，朱康.高壓電氣設備試驗方法[M].2版.北京：中國電力出版社，2004.
[3] 閻春雨，陳志勇，高駿.電流互感器現場高壓介損測量[J].高壓電器，2009，45(2)：87-89.
[4] 閻春雨，王永輝，劉海峰，崔擁軍.串聯補償法用于電流互感器高壓介損測量[J].河北電力技術，2002，21(1)：l-2.
