低壓電涌保護器可靠性改進
朱文灝1，2，奚明2，郭其一1
1 同濟大學 電子與信息工程學院，上海 201804； 2 上海施耐德低壓終端電器有限公司，上海 201109
摘 要：針對現有電涌保護器(SPD)的結構特點及可靠性問題，對SPD結構進行了改進，并給出了脫離器、低溫材料及插拔結構的改進設計方案。試驗結果表明，改進的結構從原理上解決了浪涌保護器脫離器動作不平衡問題，提高了SPD產品熱穩定性，增強了短路短時耐受能力，減少了故障的發生，且提高了SPD模塊更換的便捷性。
關鍵詞：電涌保護器；可靠性；脫離器；熱穩定性；插拔力
中圖分類號：TM862 文獻標識碼：B 文章編號：1007-3175(2015)04-0042-04
Improvement of Reliability for Low-Voltage Surge Protective Device
ZHU Wen-hao1, 2, XI Ming2, GUO Qi-yi1
1 School of Electronics and Information, Tongji University, Shanghai 201804, China;
2 Schneider Shanghai Low Voltage Terminal Apparatus Co., Ltd, Shanghai 201109, China
Abstract: Aiming at the existing surge protector device (SPD) structure characteristic and reliability problem, this article proposed a new structure for improvement and presented the improved design scheme for separator, low temperature material and inserting and pulling structure. The test result shows that the improved structure has solved the operating imbalance problem of surge protector device separator in theory, which enhances thermal stability of SPD product, reinforces capability of short-circuit short time endurance, reducing the failure, and improves convenience of changing SPD module.
Key words: surge protector device; reliability; separator; thermal stability; inserting and pulling force
參考文獻
[1] GB 18802.1—2011 低壓電涌保護器(SPD) 第1部分：低壓配電系統的電涌保護器 性能要求和試驗方法[S].
[2] 尹天文，王碧云，蔣容興.電涌保護器脫離器的設計與研究[J].低壓電器，2006(8)：3-7.
[3] 王碧云，蔣容興.低壓電涌保護器的發展動向[J].低壓電器，2005(9)：3-6.
[4] 黃曉虹，周歧斌，王碧云，等.低壓電涌保護器新版IEC標準條款內容的重要變化[J].低壓電器，2011(20)：53-57.
[5] 鄧雪梅，耿濟棟.電涌保護器的脫扣機構和電涌保護器：中國，201010223161.9[P].2010-07-12.
[6] 孫瑋，劉全和.電涌保護器的脫扣機構和電涌保護器：中國，201110346844.8[P].2011-11-07.
[7] 孫瑋，歷曉東.浪涌保護器：中國，201120435241.0[P].2011-11-07.
