中壓固體絕緣環氧樹脂APG制造新工藝
吳建紅1，葛樂矣2，王福潤2，易平2，江文松3
(1 鎮江市誠翔電器有限責任公司，江蘇 鎮江 212009；
2 南瑞集團北京電研華源電力技術有限公司，北京 102200；
3 北京航空航天大學 儀器科學與光電工程學院，北京 100191)
摘 要： 介紹了中壓固體絕緣環氧樹脂APG 制造新工藝。對固封極柱機械與電磁場結構、APG工藝的材料選型和固封極柱制造工藝等方面進行了優化，解決了易產生氣泡和表面污穢、不環保等難題。該新工藝產品得到了實際工程試驗與掛網運行驗證，具有可行性。
關鍵詞： 固體絕緣；環氧樹脂；固封極柱；APG 工藝
中圖分類號：TM215.1 文獻標識碼：B 文章編號：1007-3175(2015)01-0047-04
Medium-Voltage Solid Insulation Epoxy APG Manufacturing New Technology
WU Jian-hong1, GE Le-yi2, WANG Fu-run2, YI Ping2, JIANG Wen-song3
（1 Zhenjiang Chengxiang Electrical Appliance Co., Ltd, Zhenjiang 212009, China;
2 NARI Group, Beijing Dianyanhuayuan Power Technology Co., Ltd, Beijing 102200, China;
3 School of Instrument Science and Opto-Electronics Engineering, Beihang University, Beijing 100191 , China）
Abstract: Introduction was made to the medium-voltage solid insulation epoxy APG manufacturing new technology. The new technology carried out optimization including solid insulation pole mechanism and electromagnetic structure, APG technology materials selection and solid insulation pole manufacturing technology and so on, solving the difficulties that it is easy to generate air bubble, surface dust without environmental protection. The new product has passed verification of engineering test and online operations, with great feasibility.
Key words: solid insulation; epoxy; solid insulation pole; APG technology
參考文獻
[1] 袁端磊，劉亞娟，史鴻威.中壓環氧樹脂絕緣件APG工藝淺談[J].科技創新導報，2011(22)：60.
[2] 李禹生，郝逢南.真空斷路器固封極柱及其澆注工藝淺談[J].電氣制造，2007(1)：60-61.
[3] 紀開來.環氧樹脂自動壓力凝膠設備及故障分析[J].科技與企業，2005(F08)：31-34.
[4] 李建基.固封極柱技術在真空斷路器中的應用[J].大眾用電，2005(4)：21-22.
[5] 孫根新，李永強，沈國平.APG材料的開發和應用[J].嘉興學院學報，2004，16(3)：109-110.
[6] Hishikawa S. Technical History and Future Prospects of Cast Epoxy Resin Systems for Heavy Electrical Insulation Materials[C]//Electrical Insulating Materials(ISEIM), 2011.
[7] 周磊，潘熀.幾種主流固體絕緣固封式真空斷路器淺析[J].華東電力，2010，38(8)：1286-1288.
[8] 龐鳴崴.APG工藝生產環氧絕緣件的設備[J].熱固性樹脂，2000，15(2)：24-26.
[9] Nakagawa T, Nakiri T, Hosoya R. Electrical Properties of Biodegradable Polylactic Acid Film[J].IEEE Transactions on Industry Applications, 2004, 40(4)：1020-1024.
[10] Oi T, Shinyama K, Fujita S. Electrical P r o p e r t i e s o f H e a t - T r e a t e d P o l y l a c t i c
Acid[J].Electrical Engineering in Japan,2012, 180(1)：1-8.
[11] 張賽軍，袁寧，阮鋒.APG 工藝用環氧樹脂體系的固化及流變模型[J]. 合成樹脂及塑料，2007，24(3)：20-24.
[12] Choi S, Kim J. Thermal Conductivity of Epoxy Composites with a Binary-Particle System
of Aluminum Oxide and Aluminum Nitride Fillers[J].Composites Part B-Engineering,2013(51)：140-147.
[13] Wei T, Song L P, Zheng C. The Synergy of a Three Filler Combination in the Conductivity of Epoxy Composites[J].Materials Letters,2010, 64(21)：2376-2379.
