一種可進行TCR晶閘管閥全電壓全電流試驗的試驗系統
李成博， 張磊，劉磊，陳立群
（南京南瑞繼保電氣有限公司，江蘇 南京 211102）
摘 要：基于TCR（晶閘管控制電抗器）閥組正常運行時候的電壓、電流應力的特點，給出了一種應用于TCR 雙向晶閘管閥組的合成回路試驗方案。通過Y 型TCR連接的方式實現TCR大電流的輸出，通過直流電壓源和電壓振蕩回路實現閥組大電壓的施加，并完成了最高電壓110 kV、最大電流4 000 A合成回路試驗系統的建設。在此試驗回路中完成額定電壓20 kV、額定電流2 700 A的TCR閥組的運行試驗，試驗結果表明，該試驗系統完全能夠滿足IEC和國標中對TCR閥組型式試驗的要求，可以完成閥組全工況性能測試，大大加快TCR閥組的開發速度并保證所開發閥組的性能。
關鍵詞：合成回路；晶閘管控制電抗器；運行試驗
中圖分類號：TN34 文獻標識碼：B 文章編號：1007-3175(2019)02-0060-04
A Kind of Test System Capable of Performing Full Voltage and Full Current Test for
Thyristor Control Reactor Thyristor Valve
LI Cheng-bo, ZHANG Lei, LIU Lei, CHEN Li-qun
（NR Electric Co., Ltd, Nanjing 211102, China）
Abstract: Based on the characteristics of the voltage and current stress during the normal operationofthyristor control reactor (TCR) valve bank, this paper gave a synthetic circuit test scheme for TCR bidirectional thyristor valve bank.The Y type connection mode was used to realize the big current output of TCR and the direct current voltage source and the voltage oscillation circuit was used to realize the infliction of valve bank big voltage. On this basis, a test system with the highest voltage of 110 kV and a maximum current of 4 000 A was built. In this test circuit the running test of TCR valve bank with nominal voltage of 20 kV and nominal current of 2 700 A was completed. The test results show that the test system can fully meet the requirements of the TCR valve type test which was requested in IEC and national standard, and it can complete the full operating performance test.Through the use of the synthetic circuit, the development speed of TCR valve can be greatly accelerated, and the developed valve can be guaranteed.
Key words: synthetic test circuit; thyristor control reactor; operation test
參考文獻
[1] 溫家良，湯廣福，查鯤鵬，等. 高壓晶閘管閥復合“全工況”試驗裝置的研究[J]. 電網技術，2005，29(2)：38-43.
[2] 王兆安，黃俊. 電力電子技術[M]. 北京：機械工業出版社，2005.
[3] 盛寶良，JANSSON E，BLOMBERG A，等. 用于HVDC晶閘管模塊運行試驗的新和成試驗回路[J]. 高壓電器，2002，38(5)：1-4.
[4] MATHUR R M，VARMA R K. 基于晶閘管的柔性交流輸電控制裝置[M]. 徐政，譯. 北京：機械工業出版社，2005.
